J30ja-74zkw-J Aviation Connector Quick Locking Male Female Miniature Rectangular Electrical Connector

Product Description

Product Description

 

Recommended by seller

 

Product features ★ Corresponding to the M-D-M series ★ Number of cores: There are 12 specifications of 9, 15, 21, 25, 31, 37, 51, 66, 74, 100, and 144 cores; ★ Strand type elastic contact pin (twist needle) is adopted, with high contact density; ★ The cross-sectional area of the wire core is 0.035mm2~0.2mm2, and it is recommended to choose 0.1mm2~0.15mm2; ★The locking components of this series of products are supplied together with the product assembly according to the ordering requirements. If locking components are not required, they should be specified in the contract; ★ The product performance meets the requirements of GJB2446A-2011 (equivalent to MIL-C-83513); ★ Implementation of enterprise standard: Q/LSQJ0006-2018 "Detailed specification for J30J series micro rectangular electrical connectors"

Main technical features

ambient temperature	-55~+125 ° C	contact resistance	≤ 10mΩ
relative humidity	+Up to 95% at 40	insulation resistance	≥ 5000M Ω
vibration	10-2000Hz 196m/s ²	Dielectric Strength	800V
Impact	735m/s ²	Mechanical lifespan	500 times
acceleration	735m/s ²	Instantaneous break time	≤ 1μs
Rated current	3A

1 .Series master name code : J30J, one basic type J30JC and one copper nickel plating J30JS A stainless steel passivation 2 .Series modifications : No marked one basic type A one fast lock type E-short shell type M-adhesive sealing product R p in, jack reverse type D shell hole changed to M2 threaded hole G a high-temperature resistant series of products 3 .Number of contact parts: 9 15 21 25 31 37 51 66 74 100 144 4 .Types of connectors and contacts: TJ one plug installation pin ZK socket installation socket ZJ socket with pin installation TK plug installation socket 5 .End form: Unmarked crimping type S-welding type N. N3, N4, N8, N12 continuous printed boards with a grid spacing of 2.54 x 2.54 W. W6 one bend printed circuit board with a grid spacing of 2.54 x 2.54

6 .Type of locking and installation components: Unmarked a default lock assembly (default L for wire plug or wire plug, default P for wire socket or welding socket, default P7 for curved printed plate, default P5 for straight printed plate) Y 1 does not provide the locking assembly Ordinary locking components like L, P, K type, etc., see J30J locking and the type and use instructions of installation components 7 .Modified product identification: A, A5 A product wire coat wave cover, and the tail has A clamp wire pressure plate D a shell to increase the anti-rotation structure D2 a screw compression spring and screw locking structure, plug matching wire clip G a shell cadmium plating on the surface J 1 Print board grid spacing changed to 1.272.54Q, Q8, (9.6), (11.6), one shell flange is widened

8 .Attachment identification A1 A tail clip attachment (only for pressing and welded products) A2 a tail line clip attachment (only for Q8 type and Q8 type welding line type products)

A3 A tailline clip additional (only for pressing wire typeand welding line type products) Note: The aditional description is not an integral part of the order mark. Please indicate the specifications of the pressed wire in brackets, such as: wire section area, length and color, etc. When there are special connection requirements, please give the wiring relationship.

Signs example :

J30J-31ZKPGAD (11.6) (The wire is made of AFR-250, 0.12mm2, with a wire length of 300mm and a nylon thread sleeve)

The above symbols indicate that the number of contacts is 31 cores, the socket is equipped with a socket, the tail end of the contact is crimped, with a P-shaped locking component, a tail cover and wire clamp, and the wire harness is covered with heat shrink tubing and shielding mesh as a whole. The shell, wire clamp, and tail cover are all cadmium plated. The shell flange has an anti rotation groove and the flange width is 11.6mm; The wire grade is AFR-250, the cross-sectional area of the wire core is 0.12mm2, and the wire shedding length is not less than 300mm. The wire color is arbitrary, but the same batch of products must be consistent, and all hole positions must be crimped with the wire (for any additional instructions that do not specify the wire color or do not mention the requirements for connecting wires at each hole position, this is the default). The J30J socket with a nylon thread sleeve should also be installed on the outermost layer of the wire bundle.

 

 

 

 

 

1> Q: How to buy your product? A: You need to do the following. * Confirm current rating and number of contacts * Confirm connector and contact gender *Confirm the assembly style * Confirm the mating method (series or parallel) *Confirm the cable outer diameter *Confirm cable length and material.

2> Q: How to get samples? A: I am honored to provide you samples, but we can only provide However, we can only provide you a free sample and the shipping cost should be paid by yourself.

3> Q: What does your factory do in terms of quality control? A: Quality is priority. New age people always attach great importance to quality control from start to finish. Our factory has obtained ISO9001, GJB9001, QPL lSO14001, certificates.